Smartctl Open Device Dev Sda Failed Dell Or Megaraid Controller Please Try Adding 39d Megaraid N 39 Extra Quality High Quality Review

(Note: This only works if the controller is in JBOD/HBA pass-through mode rather than a hardware RAID array).

Alternatively, use the Dell/LSI tool with the command sudo storcli /c0 /eall /sall show and look for the DID (Device ID) column. Execute the Correct Command : (Note: This only works if the controller is

This command will display information about all logical drives configured on the MegaRAID controller. Look for the logical drive number associated with the disk drive you want to monitor. which may not simply be 0

corresponds to the assigned by your RAID controller, which may not simply be 0, 1, 2, etc.. Use one of the following methods to find it: (Note: This only works if the controller is