Unlock Bootloader Using Termux Link [repack]

Connect the "Master" phone to the "Target" phone using the USB OTG cable. On the "Target" phone, a prompt will appear asking to "Allow USB Debugging." Grant the permission. 4. Verify Connection In Termux, type: adb devices Use code with caution.

Open Termux on the host Android device. You need to update the packages and install the Android platform tools repository. Run the following commands sequentially:

Now, command the target device to reboot out of its standard Android operating system and enter its bootloader interface: adb reboot bootloader Use code with caution. unlock bootloader using termux link

However, there is a catch: And you cannot use Termux to unlock the same device you are holding because you need to reboot into bootloader mode, where Termux cannot run.

I can provide the exact syntax modifications or custom tool download repositories tailored directly to your specific hardware setup. Share public link Connect the "Master" phone to the "Target" phone

Plug the into the host phone (the one running Termux). Connect the standard USB data cable to the OTG adapter. Plug the other end of the data cable into the target phone .

Look at your phone screen. You will likely see a prompt asking to confirm the unlock. Use the volume buttons to highlight "Yes" or "Unlock the bootloader" and press the power button to confirm. Verify Connection In Termux, type: adb devices Use

Verify the installation by typing fastboot --version and adb version . If the terminal returns version numbers, your host environment is ready. Step 3: Establishing the Termux Link (Physical Connection) This is where the physical "Termux link" is established.