Fret Work Step-by-step Pdf 'link'

Apply multiple thin coats, lightly sanding with 400-grit sandpaper between layers, to seal the intricate edges without creating pooling or drips. 3. Creating a Print-Ready Fretwork PDF

Here is a step-by-step guide to fret work, which you can follow using our downloadable PDF guide: fret work step-by-step pdf

After leveling, the frets will be flat on top. They must be re-crowned (shaped into a dome) for proper intonation. Apply multiple thin coats, lightly sanding with 400-grit

Use the "Rule of 18" (scale length divided by 17.817) to calculate precise spacing. Apply multiple thin coats

Sharp fret ends are caused by wood shrinkage (fret sprout). Leveling usually dings the edges.