Align the bracket on the search coil with the lower stem. Insert the plastic bolt through the holes and tighten the nut by hand. Do not overtighten.
Keep the search coil at a consistent height of 0.5 to 1 inch. Orbitor Prospector 100 Metal Detector Manual
High setting: Filters out pull-tabs and foil, prioritizing highly conductive metals like copper and silver coins. Align the bracket on the search coil with the lower stem
: Move the search coil at a constant speed, keeping it parallel to and about 1/2 inch above the surface. familiarize yourself with the hardware:
Visual needle indicator that shows signal strength.
The Orbitor Prospector 100 is a Very Low Frequency (VLF) detector optimized for coin shooting, relic hunting, and gold prospecting in mild to moderate ground conditions. Before we dive into the controls, familiarize yourself with the hardware: