Markem Imaje Smartdate X40 Manual ^hot^ Jun 2026

Supports ribbon lengths up to 1100 m and widths between 20 mm and 55 mm.

| Problem | Recommended Action | |---------|-------------------| | Poor print quality | Ensure printhead is aligned parallel to the print roller | | Ribbon tracking issues | Check printhead alignment; misalignment can make ribbon cores difficult to remove | | Encoder malfunction | Position encoder close to printer (ideally on the print roller); calibrate as detailed in the Encoder section | | Negative speed display | Encoder direction is set incorrectly | | Poor print quality at low speeds (below 50 mm/s) | Switch encoder to High Resolution mode; move printhead position to 2mm after roller centerline; reduce air pressure to 2 bar | | Poor print quality at high speeds (above 400 mm/s) | Consider using more solid Sans Serif fonts or bold versions; fine-detail fonts may not print as well | | Unusually high darkness setting | Printhead likely needs cleaning (darkness was increased to compensate) | markem imaje smartdate x40 manual

Inspect the rubber drive rollers for wear, pitting, or stuck debris. Clean with compressed air or an IPA wipe. Supports ribbon lengths up to 1100 m and

Push jobs directly from a central server to individual production lines. 4. Routine Maintenance and Printhead Care Push jobs directly from a central server to