| Error Message / Issue | Probable Cause & Resolution | | :--- | :--- | | | 1. Sensor failure. Calibration is corrupted or the internal sensor is damaged. 2. Attempting to measure a field exceeding ±20kV. 3. Action: Return to a qualified service center for repair. | | No display / Won't power on | 1. Battery is dead. 2. Battery is not connected properly inside the compartment. 3. Action: Replace the 9V battery. Check the connection clip. | | "LOW BAT" icon is on | The 9V battery is low. Accuracy may be affected. Action: Replace the battery immediately. | | Reading is unstable / drifting | 1. The meter is not zeroed. 2. The measurement distance is incorrect. 3. High humidity is causing erratic readings. 4. The operator is holding the meter too close to their own body, imparting a static field. | | Unit auto-powers off too quickly | This is a normal function. If it becomes an issue, the internal timer may be faulty. No user adjustment is available. |
The SIMCO FMX002 system requires regular maintenance to ensure optimal performance and longevity. The maintenance schedule includes: simco fmx002 manual top
Runs on a standard 9V battery, typically lasting about 30 hours of continuous use. | Error Message / Issue | Probable Cause
: For the most accurate measurements, the user should be grounded or hold the conductive plastic housing firmly. Action: Return to a qualified service center for repair