Motomaster Battery Charger 111567 Manual Verified Jun 2026

: Ensure the area is well-ventilated. If the battery is in a vehicle, turn off all accessories to prevent sparks. Connect Clamps Connect the Red (Positive) clamp to the positive (+) battery post. Connect the Black (Negative)

Select the (e.g., 2A or 12A) based on the size of the battery and how quickly you need it charged. 4. Monitoring motomaster battery charger 111567 manual verified

The 11-1567 model uses an LED display to communicate system faults: Reverse polarity (clamps are on the wrong posts). Battery voltage is too low to accept a charge. Battery voltage is too high for the selected setting. : Ensure the area is well-ventilated

: The clamps are on the wrong terminals. Connect the Black (Negative) Select the (e

11-1567 (MotoMaster Intelligent Battery Charger) Input Voltage: 120V AC, 60Hz Output Voltage: 12V DC nominal

: Use the control panel to select your specific Battery Type and desired Charge Rate .

This charger is designed for 12V lead-acid batteries. Below are the verified specs from the original product datasheet: