Stc-600 Temperature Controller Manual Pdf | Popular

: Adjustable compressor startup delay and alarm delay after power-up to prevent equipment damage.

The STC-600 interface is designed for straightforward operation and programming.

±1°C (-40°C to +50°C); ±2°C for other ranges Relay Output Capacity: Cooling Relay: 10A / 220VAC Defrost/Alarm Relay: 10A / 220VAC Sensor Type: NTC Sensor (Cable length typically 2 meters) Front Panel Waterproof Rating: IP65 Operating Ambient Temperature: 0°C to +60°C Storage Temperature: -30°C to +75°C Relative Humidity: 20% to 85% (No condensate) 2. Wiring Diagram and Installation Stc-600 Temperature Controller Manual Pdf

Contact your supplier with the model number STC-600 and sensor type (NTC 10K).

Exits parameter modifications instantly and saves settings, or mutes the buzzer during an active alarm. 5. Parameter Settings and Programming Matrix : Adjustable compressor startup delay and alarm delay

The cooling compressor triggers when the probe reads (Target + Hysteresis).

Supports both electric heating and natural defrosting methods. Wiring Diagram and Installation Contact your supplier with

When the measured cabinet temperature rises to or above F1 + F2 , and the compressor protection delay ( F3 ) has expired.